Challenge: This state owned gas utility had a requirement for the disposal of trash from an oil platform in the tropics. They had limited space, a punishing environment, need for ease of use, and convenient way of transporting waste from the platform to shore.
Solution: Working with client’s engineering consulting firm, KenBay built the highest quality RotoPacSeaPac made entirely of 316 stainless steel with all valves, wires, controls, etc. sealed.
Challenge: Client required two marine environment SeaPac compactors requiring little space on two 2 new floating barges which will house 288 people each.
Solution: Assuming 10 lbs of trash per day for each person, the client determined that only a rotary arm compactor like the RotoPac industrial waste compactor could compact this amount into manageable 4’ cube-bags weighing 650 lbs each.
Result: These compacted bags are easily taped off to be stored until carted away. On a barge this size with this many inhabitants, space is at a premium.
Challenge: Cost of disposing of hazardous waste in tri-wall boxes produced by their paint shop doing repair to aircraft.
Solution: A RotoPacHazPac with its 6 to 1 compaction was installed.
Result: The high compaction reduced the number of tri-wall boxes needed by a factor of 6 and significantly hauling costs producing a savings of $29,000 per year.
Challenge: An army installation was built inside a mountain providing very high security. To remove trash from the secure area the maintenance personnel had to take the trash through a security checkpoint and again when they returned the dumpster to the secure area. The process of removing several cubic yards of trash took over 2 hours.
Solution: The RotoPac commercial trash compactor was placed.
Result: With the RotoPac, they were able to reduce these trips by 80%. The RotoPac’s ease of use significantly reduced the personnel effort required to remove waste from the fort.
