United States Navy
Challenge
Cost of disposing of hazardous waste in tri-wall boxes produced by their paint shop doing repair to aircraft.
Solution
A RotoPacHazPac with its 6 to 1 compaction was installed.
Result
The high compaction reduced the number of tri-wall boxes needed by a factor of 6 and significantly hauling costs producing a savings of $29,000 per year.
United States Army
Challenge
An army installation was built inside a mountain providing very high security. To remove trash from the secure area the maintenance personnel had to take the trash through a security checkpoint and again when they returned the dumpster to the secure area. The process of removing several cubic yards of trash took over 2 hours.
Solution
The RotoPac commercial trash compactor was placed.
Result
With the RotoPac, they were able to reduce these trips by 80%. The RotoPac’s ease of use significantly reduced the personnel effort required to remove waste from the fort.
Cashman Equipment
Challenge
Client required two marine environment SeaPac compactors requiring little space on two 2 new floating barges which will house 288 people each.
Solution
Assuming 10 lbs of trash per day for each person, the client determined that only a rotary arm compactor like the RotoPac industrial waste compactor could compact this amount into manageable 4’ cube-bags weighing 650 lbs each.
Result
These compacted bags are easily taped off to be stored until carted away. On a barge this size with this many inhabitants, space is at a premium.
PEMEX
Challenge
This state owned gas utility had a requirement for the disposal of trash from an oil platform in the tropics. They had limited space, a punishing environment, need for ease of use, and convenient way of transporting waste from the platform to shore.
Solution
Working with client’s engineering consulting firm, KenBay built the highest quality RotoPacSeaPac made entirely of 316 stainless steel with all valves, wires, controls, etc. sealed.