Solutions

Cardboard

The RotoPac™ Industrial compacts cardboard, without manually breaking down boxes, at up to 6:1 ratios, dramatically reducing container volume and hauling frequency. Its pallet-sized footprint allows placement directly at receiving docks or production lines where packaging waste is generated.

Plastic Wrap & Packaging

The RotoPac™ Industrial's rotary arm technology applies continuous pressure and torque to plastic film, compressing it into dense, manageable bags. One pharmaceutical client reduced six gaylords of shrink wrap per day from a single production line to a fraction of that, freeing maintenance staff to return to production.

Non-Renewable Super Sacks

The RotoPac™ SacPac was specifically designed to compact 50 lb. sacks and supersacks directly at the point of use — off the conveyor belt or at the ingredient unpacking station. It compacts quietly (quieter than a vacuum cleaner), with a small enough footprint to sit in the corner of a production area without disrupting workflow.

Hazardous Waste

The RotoPac™ HazPac is purpose-engineered for DOT packing groups I, II, and III, compacting directly into approved bulk bags or tri-wall waste boxes at 6:1 ratios. Facilities routinely save more than $2,000 per month on disposal costs — one naval paint shop saved $29,000 per year after deployment.

Waste Produced in Explosive Environments

The RotoPac™ BlastPac is rated for NEC Class I, Division II (flammable gas/vapor) and Class II, Division II (combustible dust) environments. Every electrical component — motor, hydraulic panel, control panel, conduit, and push button station — is explosion-proof rated, delivering safe, reliable compaction where no standard compactor can go.

Waste from Edge Trim or Label Matrix Systems

The RotoPac™ Industrial's rotary arm technology applies continuous downward pressure and torque specifically suited to managing trim and matrix waste — compressing it into dense, contained bags directly at the converting line. Its pallet-sized footprint allows placement right at the point of generation, eliminating the need to cart loose trim across the facility and keeping production areas clean and safe between shifts.

Waste to Energy (WTE)

The RotoPac™ Industrial dramatically increases the density and consistency of waste before it enters the waste-to-energy stream, compacting material into uniform sealed bags that are easier to transport, store, and process. Higher compaction means more energy-recoverable material per container, fewer transport runs, and a more efficient overall program.

50lb Ingredient Sacks & Food Waste

The RotoPac™ SacPac is rated IP56 for dust protection and high-pressure water jetting, with 304 stainless steel construction and NEMA 4X sealed electrical components throughout. It handles both wet and dry food waste, compacting directly into sealed polyethylene bags that contain odors and support sanitary disposal — right at the source.

Marine & Offshore Vessel Waste

The RotoPac™ SeaPac is constructed entirely of 316L stainless steel, rated NEMA 4X and IP67, and built specifically for the harshest marine and offshore environments. It compacts waste into sealed 4-foot cube bags that are stackable and storable until shore transport — on a footprint no larger than a standard pallet.

General Industrial Trash

The RotoPac™ Industrial places compaction directly at the source of waste generation, containing debris immediately and eliminating the need for constant bin removal across active production areas.

Controlled Waste

The RotoPac™ Industrial compacts controlled waste, such as contraband, QA-rejected products, outdated medicines, and classified waste, directly into sealed polyethylene bags, minimizing open-container exposure and reducing the number of handling touchpoints between generation and documented removal.