|
|
|
|
The RotoPac
- Maximum Compaction,
Minimum Footprint |
|
|
Dimensions |
86.5"
x 51" x 61" (220 cm x 130 cm x 155 cm) |
|
Working |
119"
x 51" x 61" (302 cm x 130 cm x 155 cm) |
|
Loading Height |
58" (147 cm) |
|
Weight |
2,690 lbs (1,220 kgs) |
|
Compacted Bags |
Weight: 500- 950 pounds (227 – 431 kgs)
Dimensions: 1.8 cubic yds (1.4 cubic
meters) |
|
Electrical |
240/480v
3-phase 14amp/7amp
5 HP
(4 kw) Electric motor, 50/60 hertz
24V A.C. Control Circuit Voltage
|
|
Torque |
4,400 ft-lbs at compaction drum surface |
Safety |
Front door: machine will not operate if lockable
door is open. Emergency stop button conveniently
located. Option to keep loading door locked when in
operation. Motor overload protection. Mains
Isolator lockable. |
|
No
Installation costs |
Connect to
electrical source, press "go", continually
input trash. Remove bag when filled. |
|
Manufactured by: |
KenBay, PO Box 242, Mendham NJ 07945
Tel. 973-543-3200
www.kenbay.com |
|
Rotary arm compactors are unique in that they place
significant contact pressure and torque on waste to
remove the maximum amount of air from it. Achieving
compaction ratios of greater than 6 to 1, the RotoPac
greatly reduces your waste disposal costs, up to 80%.
The RotoPac’s rotary arm compaction makes it ideal for
compacting 1) large volumes of trash, 2) plastic
rapidly for recycling and 3) cardboard without
breaking down boxes. Built in the US, the RotoPac has
over 14 years history of outstanding performance in
North America. RotoPacs are proven workhorses in
compacting trash and recyclable materials worldwide in
thousands of companies.
|
The unique
characteristics of the original rotary arm
compactor: |
|
1.
Over 6 to 1 compaction reduces trips to
hauler’s container and hauler collections
2.
Continuous compaction for high compaction
volumes, up to 250 lbs/hour
3.
Compaction of wet and dry compactable
waste
4.
Reduces carbon footprint by fewer
collections and less landfill space required
5.
Saves space on your facility floor
(footprint of 4’ x 5’), or place outside
6.
14 years of quality and durability, low
maintenance cost
7.
Waste can be fed into the RotoPac by
·
Conveying through the top
·
Gravity feed through a chute
·
Blowing waste into it
·
Manual feed through the loading door
8.
Numerous safety features incorporated
into its design
9.
Reduces forklift traffic and displaces
labor costs
10.
Requires no supervision or skilled
operator, merely input trash and press “Run”
button
11.
No installation costs, just connect to
240V, 460V or 600V 3-phase electrical source |
|
KenBay can help with your Commercial Trash Compactor /
Compaction Equipment Concerns.
Contact us toll free 888-353-6229, or
click here to email us.
|
Features of the KenBay RotoPac Trash Compactor
- Our
Industrial trash compactors compact at the
source of waste to save many person-hours
carting loose waste from the area where waste is
produced to outside containers.
- Our
Industrial trash compactors improve store,
factory and warehouse housekeeping, and increase
safety by reducing traffic on freight elevators,
factory and warehouse floors.
- Our
Industrial trash compactors create a clean
hygienic environment by compacting wet and/or
dry waste into a polythene bag.
- Our
Industrial trash compactors require no
supervision or skilled operator unlike most
conventional balers or compactors because of its
simplicity in design and safety features.
- Our
Industrial trash compactors compact waste
continuously, even for waste that is being blown
or augured into them.
- Our
Industrial trash compactors occupy very
little space and operate quietly so they can be
located in areas where the waste emanates. They
have a 4' by 5' footprint.
- Our
Industrial trash compactors are portable so
that they can be moved in minutes with a
forklift to an area where waste may be excessive
for short periods of time.
- Our
Industrial trash compactors offer better
control over waste disposal management because
you are less reliant upon the waste hauler's
schedule.
- The
RotoPac trash compactor is designed
and constructed to the highest standards by
KenBay Engineering, an ISO 9001 company.
- Our
industrial trash compactor can be designed
to be Class 2, Division 2 explosion proof to
meet the high safety specifications of most any
industry.
|
|
Industrial waste disposal has never been easier or
more cost effective than with KenBay's innovative
rotary arm industrial trash compactors.
We
can answer your questions on rotary trash
compactors, trash removal, trash bins, trash
containers, trash receptacles, trash pick up,
trash dumpsters, trash service, trash take out,
trash disposal and trash dumpster optimization.
Please inquire as to KenBay's easy to install and
operate vertical balers,
plastic balers and
cardboard balers.
|
|
