|
Dimensions |
86.5"
x 51" x 61" (220 cm x 130 cm x 155 cm) |
|
Working |
107"
x 51" x 61" (2722 cm x 130 cm x 155 cm) |
|
Loading Height |
58" (147 cm) |
|
Weight
Bin Volume |
2,690 lbs (1,220 kgs)1.6
cubic yd (1.2 cubic m) |
|
Front
Loading Bins |
82”x47”x37” (206 cm x 119 cm x 94 cm) |
|
Rear Loading
Bins |
44”x47”x37” (112 cm x 119 cm x 94 cm) |
|
Electrical |
240/480v 3-phase 14amp/7amp
5 HP (4 kw) Electric motor, 50/60
hertz
24V A.C.
Control Circuit Voltage
|
|
Torque |
4,400 ft-lbs at compaction drum surface |
Safety |
Front door: machine will not operate if lockable
door is open. Emergency stop button conveniently
located. Option to keep loading door locked when in
operation. Motor overload protection. Mains
Isolator lockable. |
|
No
Installation costs |
Connect to
electrical source, press "go", continually
input trash. Remove bag when filled. |
|
Manufactured by: |
KenBay, PO Box 242, Mendham NJ 07945
Tel. 973-543-3200
www.kenbay.com |
Waste
can be fed into the RotoPac in various ways:
-
Conveying through the top
-
Blowing waste into it from above
-
Gravity feed through chute
-
Manual
feed through loading door
The
RotoPac is ideal for compacting:
|
Rotary arm compactors are unique in that they place
significant contact pressure and torque on waste to
remove the maximum amount of air from it. The Bin
RotoPac bins work with either rear or front-loading
trucks. The RotoPac’s rotary arm compaction makes it
ideal for quickly compacting large volumes of trash.
Built in the US, the RotoPac has over 14 years history
of outstanding performance in North America.
|
The unique
characteristics of the original rotary arm
compactor: |
- High compaction ratio (on average greater
than 6 to 1)
- Continuous compaction for high compaction
volumes, up to 250 lbs/hour
- Compaction of wet and dry compactable
waste
- Saves space on your facility floor
(footprint of 4' x 5')
- 16 years of quality durability, low
maintenance cost
- Numerous safety features incorporated into
its design
- Accepts waste from chute
- Requires no supervision or skilled
operator
- No installation costs, just connect to 240
V or 460V 3-phase electrical source
|
|
